FREE SHIPPING within the continental United States
How much does it does it weigh? 110 lbs.
What is it made out of? The vault is constructed with a double wall design. 16 gauge cold rolled steel is the minimum thickness used with an additional 12 gauge plate welded to the 16 gauge drawer front to create total thickness of .16 inch ( well over 1/8th inch). The effective thickness for the top and bottom is 11 gauge (.12"or 1/8 inch) and the effective thickness of the sides is 7 gauge (.18" well over 1/8 inch).
What is the finish coating? Black powder coating inside and out
Drawer glides and capacity? 350 lbs in drawer
How do I mount it? 3/8" mounting holes are provided in all four corners of the bottom of the case. Fasteners are not included. A universal vehicle mounting kit is available.
What are the dimensions?
Also available on a special order basis 36"W x 16"D x 11"H . This size requires a $1200 setup fee in addition to the price of the special order vault.
What type of batteries? 4 AA Alkaline
Is there a key back up? Yes, two barrel-style keys are provided. Serial number on keys allow for replacement if lost.
How many digits for the code? You choose a minimum of 3 plus A or B and up to a maximum of 8 plus A or B.
Is there a warranty? Yes, it is warranted for 7 years against defects.
Can it be hung from the top? Yes, several customers have chosen to drill mounting holes in the top and hang it with appropriate hardware.
Is it “Fire Proof”? It is “fire resistant” 100% steel but no insulation.
Is it waterproof? No, The body is powder coated so moisture is not a concern but the electronics would be affected negatively by immersion.
Can it be installed on end? Yes, it has been designed to operate on end as well as flat on the floor.
Does it come assembled? Yes, install batteries (not included) and it is ready to go. Vehicle style handles are a user installed option that requires use of a 1/8” allen wrench.
Do you offer a backlit keypad? Our primary goal is to ensure that you can open your vault when it is needed most. If the batteries run low, the vault may not open with the keypad. To ensure the longest possible battery life and minimize the chances of a low battery situation, we chose not to power a light in the keypad. Most customers will get 3-4 years out of batteries for in-home use and that will, of course, vary greatly based on the number of times the lock is activated. If the concern is the ability to see the keypad in the dark, we feel that the best solution is a separate light source not connected to the lock mechanism. There are a variety of magnetic safe lights available. We recommend a low profile light that can be placed on the face of the vault to illuminate the key pad and also be moved to the interior to see the contents of the vault like this one https://tinyurl.com/5n7ma92u and is private labeled for several companies. It casts a red glow that provides enough light to see what is needed without interfering with your night vision.
Copyright © 2022 MonsterVault - All Rights Reserved.